dmesg - 2013-10-07 09:16
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-25-pve (root@lola) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Oct 1 09:17:16 CEST 2013
Command line: BOOT_IMAGE=/vmlinuz-2.6.32-25-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 000000007d2f0000 (usable)
BIOS-e820: 000000007d2f0000 - 000000007d31c000 (reserved)
BIOS-e820: 000000007d31c000 - 000000007d35b000 (ACPI data)
BIOS-e820: 000000007d35b000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000003080000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xFCFB0
DMI: Dell Inc. PowerEdge R720/0XH7F2, BIOS 1.6.0 03/07/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-D7FFF write-back
D8000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFF80000000 write-back
1 base 000100000000 mask 3FFF00000000 write-back
2 base 000200000000 mask 3FFE00000000 write-back
3 base 000400000000 mask 3FFC00000000 write-back
4 base 000800000000 mask 3FF800000000 write-back
5 base 001000000000 mask 3FF000000000 write-back
6 base 002000000000 mask 3FF000000000 write-back
7 base 003000000000 mask 3FFF80000000 write-back
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7d2f0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007d2f0000
0000000000 - 0040000000 page 1G
0040000000 - 007d200000 page 2M
007d200000 - 007d2f0000 page 4k
kernel direct mapping tables up to 7d2f0000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000003080000000
0100000000 - 3080000000 page 1G
kernel direct mapping tables up to 3080000000 @ a000-b000
RAMDISK: 36180000 - 370b7d28
ACPI: RSDP 00000000000f0e20 00024 (v02 DELL )
ACPI: XSDT 00000000000f0f28 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 000000007d3411cc 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 000000007d31c000 07C70 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 000000007d343000 00040
ACPI: APIC 000000007d340478 0016A (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 000000007d3405e4 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000000007d340638 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 000000007d340674 00158 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000000007d340990 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 000000007d3409d0 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 000000007d340b08 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 000000007d323e30 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 000000007d3240a0 0055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 000000007d323c70 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 000000007d323ca0 00190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 000000007d341164 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 000000007d3410f4 0006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 000000007d340d30 003C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 000000007d344000 0A2B4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 2 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 2 -> Node 0
SRAT: PXM 2 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 4 -> Node 0
SRAT: PXM 2 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 0
SRAT: PXM 2 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 8 -> Node 0
SRAT: PXM 2 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 10 -> Node 0
SRAT: PXM 2 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 12 -> Node 0
SRAT: PXM 2 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 14 -> Node 0
SRAT: PXM 2 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 1 -> Node 0
SRAT: PXM 2 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 0
SRAT: PXM 2 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 0
SRAT: PXM 2 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 0
SRAT: PXM 2 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 9 -> Node 0
SRAT: PXM 2 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 11 -> Node 0
SRAT: PXM 2 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 13 -> Node 0
SRAT: PXM 2 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 15 -> Node 0
SRAT: PXM 2 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 1 0-1880000000
SRAT: Node 1 PXM 2 1880000000-3080000000
NUMA: Allocated memnodemap from a000 - a100
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001880000000
NODE_DATA [000000000000a100 - 000000000004b0ff]
bootmap [0000000000100000 - 000000000040ffff] pages 310
(8 early reservations) ==> bootmem [0000000000 - 1880000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002434b84] TEXT DATA BSS ==> [0001000000 - 0002434b84]
#3 [0036180000 - 00370b7d28] RAMDISK ==> [0036180000 - 00370b7d28]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [0002435000 - 0002435629] BRK ==> [0002435000 - 0002435629]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000a100] MEMNODEMAP ==> [000000a000 - 000000a100]
Bootmem setup node 1 0000001880000000-0000003080000000
NODE_DATA [0000001880000040 - 000000188004103f]
bootmap [0000001880042000 - 0000001880341fff] pages 300
(8 early reservations) ==> bootmem [1880000000 - 3080000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002434b84] TEXT DATA BSS
#3 [0036180000 - 00370b7d28] RAMDISK
#4 [000009cc00 - 0000100000] BIOS reserved
#5 [0002435000 - 0002435629] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000a100] MEMNODEMAP
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea000f9fffff] PMD -> [ffff880028600000-ffff880035ffffff] on node 0
[ffffea000fa00000-ffffea003fffffff] PMD -> [ffff880037200000-ffff8800677fffff] on node 0
[ffffea0040000000-ffffea00557fffff] PMD -> [ffff880067a00000-ffff88007d1fffff] on node 0
[ffffea0055800000-ffffea0061ffffff] PMD -> [ffff880100000000-ffff88010c7fffff] on node 0
[ffffea0062000000-ffffea007fffffff] PMD -> [ffff881880400000-ffff88189e3fffff] on node 1
[ffffea0080000000-ffffea00bfffffff] PMD -> [ffff88189e600000-ffff8818de5fffff] on node 1
[ffffea00c0000000-ffffea00c1ffffff] PMD -> [ffff8818de800000-ffff8818e07fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x03080000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x0007d2f0
0: 0x00100000 -> 0x01880000
1: 0x01880000 -> 0x03080000
On node 0 totalpages: 25154187
DMA zone: 64 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3827 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 492336 pages, LIFO batch:31
Normal zone: 385024 pages used for memmap
Normal zone: 24256512 pages, LIFO batch:31
On node 1 totalpages: 25165824
Normal zone: 393216 pages used for memmap
Normal zone: 24772608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009c000 - 0000000000100000
PM: Registered nosave memory: 000000007d2f0000 - 000000007d31c000
PM: Registered nosave memory: 000000007d31c000 - 000000007d35b000
PM: Registered nosave memory: 000000007d35b000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 39 pages/cpu @ffff88010c800000 s128728 r8192 d22824 u262144
pcpu-alloc: s128728 r8192 d22824 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 [1] 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 49525283
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-25-pve root=/dev/mapper/pve-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
PRAM: banned regions:
0: [00000000 - 00002435] 9270 pages
1: [00020000 - 00028411] 33810 pages
2: [00028600 - 00035fff] 55808 pages
3: [00036180 - 000370b7] 3896 pages
4: [00037200 - 00067800] 198145 pages
5: [00067a00 - 0007d1ff] 88064 pages
6: [00100000 - 0010cbff] 52224 pages
7: [01880000 - 01880350] 849 pages
8: [01880400 - 0189e400] 122881 pages
9: [0189e600 - 018de600] 262145 pages
10: [018de800 - 018e0817] 8216 pages
11: [018e0a00 - 018e0dff] 1024 pages
Total banned: 836332 pages in 12 regions
Memory: 198025944k/203423744k available (5425k kernel code, 2143700k absent, 3254100k reserved, 6936k data, 1316k init)
PRAM: selected csum mode: crc32c
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1752
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2599.960 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.92 BogoMIPS (lpj=2599960)
pid_max: default: 1048576 minimum: 301
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 256
Dcache time values: 1001 -> 9 , 4294667387
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21977 entries in 87 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000cf000000 flags: 0x0
dmar: IOMMU 0: reg_base_addr cf000000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: DRHD base: 0x000000df100000 flags: 0x1
dmar: IOMMU 1: reg_base_addr df100000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x0000007f458000 end: 0x0000007f46ffff
dmar: RMRR base: 0x0000007f450000 end: 0x0000007f450fff
dmar: RMRR base: 0x0000007f452000 end: 0x0000007f452fff
dmar: ATSR flags: 0x0
IOAPIC id 2 under DRHD base 0xcf000000
IOAPIC id 0 under DRHD base 0xdf100000
IOAPIC id 1 under DRHD base 0xdf100000
HPET id 0 under DRHD base 0xdf100000
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15 Ok.
Booting Node 0, Processors #16 Ok.
Booting Node 1, Processors #17 Ok.
Booting Node 0, Processors #18 Ok.
Booting Node 1, Processors #19 Ok.
Booting Node 0, Processors #20 Ok.
Booting Node 1, Processors #21 Ok.
Booting Node 0, Processors #22 Ok.
Booting Node 1, Processors #23 Ok.
Booting Node 0, Processors #24 Ok.
Booting Node 1, Processors #25 Ok.
Booting Node 0, Processors #26 Ok.
Booting Node 1, Processors #27 Ok.
Booting Node 0, Processors #28 Ok.
Booting Node 1, Processors #29 Ok.
Booting Node 0, Processors #30 Ok.
Booting Node 1, Processors #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (166387.55 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=64 bytes
sizeof(inode)=664 bytes
sizeof(dentry)=224 bytes
sizeof(ext3inode)=872 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=264 bytes
sizeof(task_struct)=2784 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x1fff]
pci_root PNP0A08:00: host bridge window [io 0xe000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd4000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xdf0fb000-0xdf0fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xdf0fc000-0xdf0fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdf0fd000-0xdf0fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xece8-0xecef]
pci 0000:00:1f.2: reg 14: [io 0xecf8-0xecfb]
pci 0000:00:1f.2: reg 18: [io 0xecf0-0xecf7]
pci 0000:00:1f.2: reg 1c: [io 0xecfc-0xecff]
pci 0000:00:1f.2: reg 20: [io 0xecc0-0xecdf]
pci 0000:00:1f.2: reg 24: [mem 0xdf0ff000-0xdf0ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xd5000000-0xd57fffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xd5800000-0xd5ffffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xd97c0000-0xd97cffff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10: [mem 0xd6000000-0xd67fffff 64bit pref]
pci 0000:01:00.1: reg 18: [mem 0xd6800000-0xd6ffffff 64bit pref]
pci 0000:01:00.1: reg 20: [mem 0xd97d0000-0xd97dffff 64bit pref]
pci 0000:01:00.1: reg 30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.2: reg 10: [mem 0xd7000000-0xd77fffff 64bit pref]
pci 0000:01:00.2: reg 18: [mem 0xd7800000-0xd7ffffff 64bit pref]
pci 0000:01:00.2: reg 20: [mem 0xd97e0000-0xd97effff 64bit pref]
pci 0000:01:00.2: reg 30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.3: reg 10: [mem 0xd8000000-0xd87fffff 64bit pref]
pci 0000:01:00.3: reg 18: [mem 0xd8800000-0xd8ffffff 64bit pref]
pci 0000:01:00.3: reg 20: [mem 0xd97f0000-0xd97fffff 64bit pref]
pci 0000:01:00.3: reg 30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd5000000-0xd97fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [io 0xfc00-0xfcff]
pci 0000:02:00.0: reg 14: [mem 0xdd7fc000-0xdd7fffff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xdd780000-0xdd7bffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xdc800000-0xdc81ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.2: PCI bridge to [bus 02-02]
pci 0000:00:02.2: bridge window [io 0xf000-0xffff]
pci 0000:00:02.2: bridge window [mem 0xdc800000-0xdd7fffff]
pci 0000:00:02.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
pci 0000:09:01.0: PME# disabled
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:08:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:08:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:09:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:09:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:0b:00.0: reg 10: [mem 0xd4000000-0xd4ffffff pref]
pci 0000:0b:00.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:0b:00.0: reg 18: [mem 0xdd800000-0xddffffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:0a:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:0a:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c-0c]
pci 0000:09:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:09:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:09:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x1fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7e])
pci_root PNP0A08:01: host bridge window [io 0x2000-0x3fff]
pci_root PNP0A08:01: host bridge window [io 0x4000-0x5fff]
pci_root PNP0A08:01: host bridge window [io 0x6000-0x7fff]
pci_root PNP0A08:01: host bridge window [io 0x8000-0x9fff]
pci_root PNP0A08:01: host bridge window [io 0xa000-0xbfff]
pci_root PNP0A08:01: host bridge window [io 0xc000-0xdfff]
pci_root PNP0A08:01: host bridge window [mem 0xcc000000-0xd3ffffff]
pci 0000:40:01.0: PME# supported from D0 D3hot D3cold
pci 0000:40:01.0: PME# disabled
pci 0000:40:02.0: PME# supported from D0 D3hot D3cold
pci 0000:40:02.0: PME# disabled
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:40:03.2: PME# supported from D0 D3hot D3cold
pci 0000:40:03.2: PME# disabled
pci 0000:40:01.0: PCI bridge to [bus 41-41]
pci 0000:40:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:40:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:40:02.0: PCI bridge to [bus 42-42]
pci 0000:40:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:40:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:40:03.0: PCI bridge to [bus 43-43]
pci 0000:40:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:40:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:40:03.2: PCI bridge to [bus 44-44]
pci 0000:40:03.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:40:03.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:40: on NUMA node 1 (pxm 2)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXE._PRT]
pci0000:40: Requesting ACPI _OSC control (0x15)
pci0000:40: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
pci_bus 0000:3f: on NUMA node 0 (pxm 1)
pci0000:3f: Requesting ACPI _OSC control (0x15)
pci0000:3f: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P1B1] (domain 0000 [bus 7f])
pci_bus 0000:7f: on NUMA node 1 (pxm 2)
pci0000:7f: Requesting ACPI _OSC control (0x15)
pci0000:7f: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 90, 91, 92, 93, 94, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 90 for MSI
hpet: hpet3 irq 91 for MSI
hpet: hpet4 irq 92 for MSI
hpet: hpet5 irq 93 for MSI
hpet: hpet6 irq 94 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x00e0-0x00e7]
pnp 00:07: [io 0x0880-0x08ff]
pnp 00:07: [io 0x0900-0x091f]
pnp 00:07: [io 0x0920-0x0923]
pnp 00:07: [io 0x0924]
pnp 00:07: [io 0x0370-0x0377]
pnp 00:07: [io 0x0ca0-0x0ca7]
pnp 00:07: [io 0x0ca9-0x0cab]
pnp 00:07: [io 0x0cad-0x0caf]
pnp 00:07: [io 0x0cb0-0x0cbf]
pnp 00:07: [io 0x0060-0x005f disabled]
pnp 00:07: [io 0x0064-0x0063 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io 0x0ca8]
pnp 00:08: [io 0x0cac]
pnp 00:08: [irq 10]
pnp 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:09: [mem 0xe0000000-0xe3efffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0b: [mem 0xe4000000-0xe7ffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0d: [mem 0xe3f00000-0xe3ffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xdf100000-0xdf101fff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0xcf000000-0xcf001fff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: [mem 0xfed00000-0xfed003ff]
pnp 00:11: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08ff] has been reserved
system 00:07: [io 0x0900-0x091f] has been reserved
system 00:07: [io 0x0920-0x0923] has been reserved
system 00:07: [io 0x0924] has been reserved
system 00:07: [io 0x0370-0x0377] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: [io 0x0cb0-0x0cbf] has been reserved
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:09: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:0b: [mem 0xe4000000-0xe7ffffff] has been reserved
system 00:0d: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:0e: [mem 0xdf100000-0xdf101fff] could not be reserved
system 00:0f: [mem 0xcf000000-0xcf001fff] could not be reserved
pci 0000:01:00.1: address space collision: [mem 0xdc000000-0xdc07ffff pref] conflicts with 0000:01:00.0 [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.2: address space collision: [mem 0xdc000000-0xdc07ffff pref] conflicts with 0000:01:00.0 [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.3: address space collision: [mem 0xdc000000-0xdc07ffff pref] conflicts with 0000:01:00.0 [mem 0xdc000000-0xdc07ffff pref]
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:01:00.1: BAR 6: assigned [mem 0xd9000000-0xd907ffff pref]
pci 0000:01:00.2: BAR 6: assigned [mem 0xd9080000-0xd90fffff pref]
pci 0000:01:00.3: BAR 6: assigned [mem 0xd9100000-0xd917ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd5000000-0xd97fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:02.2: PCI bridge to [bus 02-02]
pci 0000:00:02.2: PCI bridge to [bus 02-02]
pci 0000:00:02.2: bridge window [io 0xf000-0xffff]
pci 0000:00:02.2: bridge window [mem 0xdc800000-0xdd7fffff]
pci 0000:00:02.2: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [io disabled]
pci 0000:00:03.2: bridge window [mem disabled]
pci 0000:00:03.2: bridge window [mem pref disabled]
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: bridge window [io disabled]
pci 0000:00:11.0: bridge window [mem disabled]
pci 0000:00:11.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: bridge window [io disabled]
pci 0000:0a:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:0a:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [io disabled]
pci 0000:09:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:09:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c-0c]
pci 0000:09:01.0: PCI bridge to [bus 0c-0c]
pci 0000:09:01.0: bridge window [io disabled]
pci 0000:09:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:09:01.0: bridge window [mem pref disabled]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [io disabled]
pci 0000:08:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:08:00.0: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:40:01.0: PCI bridge to [bus 41-41]
pci 0000:40:01.0: PCI bridge to [bus 41-41]
pci 0000:40:01.0: bridge window [io disabled]
pci 0000:40:01.0: bridge window [mem disabled]
pci 0000:40:01.0: bridge window [mem pref disabled]
pci 0000:40:02.0: PCI bridge to [bus 42-42]
pci 0000:40:02.0: PCI bridge to [bus 42-42]
pci 0000:40:02.0: bridge window [io disabled]
pci 0000:40:02.0: bridge window [mem disabled]
pci 0000:40:02.0: bridge window [mem pref disabled]
pci 0000:40:03.0: PCI bridge to [bus 43-43]
pci 0000:40:03.0: PCI bridge to [bus 43-43]
pci 0000:40:03.0: bridge window [io disabled]
pci 0000:40:03.0: bridge window [mem disabled]
pci 0000:40:03.0: bridge window [mem pref disabled]
pci 0000:40:03.2: PCI bridge to [bus 44-44]
pci 0000:40:03.2: PCI bridge to [bus 44-44]
pci 0000:40:03.2: bridge window [io disabled]
pci 0000:40:03.2: bridge window [mem disabled]
pci 0000:40:03.2: bridge window [mem pref disabled]
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:09:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 85 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:40:01.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:01.0: setting latency timer to 64
pci 0000:40:02.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:02.0: setting latency timer to 64
pci 0000:40:03.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:03.0: setting latency timer to 64
pci 0000:40:03.2: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:03.2: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:00: resource 8 [io 0xe000-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0xd4000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdc7fffff]
pci_bus 0000:01: resource 2 [mem 0xd5000000-0xd97fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xdc800000-0xdd7fffff]
pci_bus 0000:08: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:08: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:09: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:0a: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:0b: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xdef00000-0xdeffffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:0d: resource 8 [io 0xe000-0xffff]
pci_bus 0000:0d: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 10 [mem 0xd4000000-0xdfffffff]
pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:40: resource 4 [io 0x2000-0x3fff]
pci_bus 0000:40: resource 5 [io 0x4000-0x5fff]
pci_bus 0000:40: resource 6 [io 0x6000-0x7fff]
pci_bus 0000:40: resource 7 [io 0x8000-0x9fff]
pci_bus 0000:40: resource 8 [io 0xa000-0xbfff]
pci_bus 0000:40: resource 9 [io 0xc000-0xdfff]
pci_bus 0000:40: resource 10 [mem 0xcc000000-0xd3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:0b:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15583k freed
dmar: Unsupported device scope
audit: initializing netlink socket (disabled)
type=2000 audit(1381063719.661:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 95 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 96 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 97 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 98 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 99 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 100 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 101 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 102 for MSI/MSI-X
pcieport 0000:40:01.0: setting latency timer to 64
alloc irq_desc for 103 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:01.0: irq 103 for MSI/MSI-X
pcieport 0000:40:02.0: setting latency timer to 64
alloc irq_desc for 104 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:02.0: irq 104 for MSI/MSI-X
pcieport 0000:40:03.0: setting latency timer to 64
alloc irq_desc for 105 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:03.0: irq 105 for MSI/MSI-X
pcieport 0000:40:03.2: setting latency timer to 64
alloc irq_desc for 106 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:03.2: irq 106 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 10
ipmi_si: Could not enable interrupts, failed set, using polled mode.
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xdf0fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-25-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-25-pve ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bridge firewalling registered
Dcache charge unit 924
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-10-06 12:48:41 UTC (1381063721)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 700k freed
Freeing unused kernel memory: 1604k freed
udevd[503]: starting version 175
megasas: 06.600.18.00 Mar. 07, 17:00:00 PDT 2013
megasas: 0x1000:0x005b:0x1028:0x1f38: bus 2:slot 0:func 0
alloc irq_desc for 42 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42
megaraid_sas 0000:02:00.0: setting latency timer to 64
megasas: FW now in Ready state
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 114 for MSI/MSI-X
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 115 for MSI/MSI-X
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 118 for MSI/MSI-X
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 119 for MSI/MSI-X
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 120 for MSI/MSI-X
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 121 for MSI/MSI-X
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 122 for MSI/MSI-X
[scsi0]: FW supports MSIX vector, OnlineCPUs: , Current MSIX
megasas:IOC Init cmd success
megasas: INIT adapter done
bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.74.22 ($DateTime: 2012/12/19 23:09:04 $)
megaraid_sas: Controller type: MR, Memory size is: 512MB
scsi0 : LSI SAS based MegaRAID driver
bnx2x: msix capability found
bnx2x: about to allocate ethernet device with tx_count 31 rx_count 32
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
bnx2x 0000:01:00.0: setting latency timer to 64
scsi 0:0:0:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
bnx2x 0000:01:00.0: part number 394D4342-30383735-30305430-473030
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 123 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 123 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi 0:2:0:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi 0:2:2:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff100 irq 123
ata2: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff180 irq 123
ata3: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff200 irq 123
ata4: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff280 irq 123
ata5: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff300 irq 123
ata6: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff380 irq 123
sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] 1952448512 512-byte logical blocks: (999 GB/931 GiB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
sd 0:2:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:2:0: [sdc] 3748659200 512-byte logical blocks: (1.91 TB/1.74 TiB)
sda:
sd 0:2:2:0: [sdc] Write Protect is off
sd 0:2:2:0: [sdc] Mode Sense: 1f 00 00 08
sd 0:2:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda1 sda2
sda: p2 size 936652800 exceeds device capacity, limited to end of disk
sdb:
sdc:
sd 0:2:0:0: [sda] Attached SCSI disk
unknown partition table
unknown partition table
sd 0:2:2:0: [sdc] Attached SCSI disk
sd 0:2:1:0: [sdb] Attached SCSI disk
bnx2x: set bp->max_cos to 1
alloc irq_desc for 124 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 124 for MSI/MSI-X
alloc irq_desc for 125 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 125 for MSI/MSI-X
alloc irq_desc for 126 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 126 for MSI/MSI-X
alloc irq_desc for 127 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 127 for MSI/MSI-X
alloc irq_desc for 128 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 128 for MSI/MSI-X
alloc irq_desc for 129 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 129 for MSI/MSI-X
alloc irq_desc for 130 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 130 for MSI/MSI-X
alloc irq_desc for 131 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 131 for MSI/MSI-X
alloc irq_desc for 132 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 132 for MSI/MSI-X
alloc irq_desc for 133 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.0: irq 133 for MSI/MSI-X
bnx2x: msix capability found
bnx2x: about to allocate ethernet device with tx_count 31 rx_count 32
alloc irq_desc for 36 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
bnx2x 0000:01:00.1: setting latency timer to 64
bnx2x 0000:01:00.1: part number 394D4342-30383735-30305430-473030
bnx2x: set bp->max_cos to 1
alloc irq_desc for 134 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 134 for MSI/MSI-X
alloc irq_desc for 135 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 135 for MSI/MSI-X
alloc irq_desc for 136 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 136 for MSI/MSI-X
alloc irq_desc for 137 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 137 for MSI/MSI-X
alloc irq_desc for 138 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 138 for MSI/MSI-X
alloc irq_desc for 139 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 139 for MSI/MSI-X
alloc irq_desc for 140 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 140 for MSI/MSI-X
alloc irq_desc for 141 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 141 for MSI/MSI-X
alloc irq_desc for 142 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 142 for MSI/MSI-X
alloc irq_desc for 143 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.1: irq 143 for MSI/MSI-X
bnx2x: msix capability found
bnx2x: about to allocate ethernet device with tx_count 31 rx_count 32
bnx2x 0000:01:00.2: PCI INT B -> GSI 36 (level, low) -> IRQ 36
bnx2x 0000:01:00.2: setting latency timer to 64
bnx2x 0000:01:00.2: part number 394D4342-30383735-30305430-473030
bnx2x: set bp->max_cos to 1
alloc irq_desc for 144 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 144 for MSI/MSI-X
alloc irq_desc for 145 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 145 for MSI/MSI-X
alloc irq_desc for 146 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 146 for MSI/MSI-X
alloc irq_desc for 147 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 147 for MSI/MSI-X
alloc irq_desc for 148 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 148 for MSI/MSI-X
alloc irq_desc for 149 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 149 for MSI/MSI-X
alloc irq_desc for 150 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 150 for MSI/MSI-X
alloc irq_desc for 151 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 151 for MSI/MSI-X
alloc irq_desc for 152 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 152 for MSI/MSI-X
alloc irq_desc for 153 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.2: irq 153 for MSI/MSI-X
bnx2x: msix capability found
bnx2x: about to allocate ethernet device with tx_count 31 rx_count 32
alloc irq_desc for 37 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: PCI INT C -> GSI 37 (level, low) -> IRQ 37
bnx2x 0000:01:00.3: setting latency timer to 64
bnx2x 0000:01:00.3: part number 394D4342-30383735-30305430-473030
usb 1-1: new high speed USB device number 2 using ehci_hcd
bnx2x: set bp->max_cos to 1
alloc irq_desc for 154 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 154 for MSI/MSI-X
alloc irq_desc for 155 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 155 for MSI/MSI-X
alloc irq_desc for 156 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 156 for MSI/MSI-X
alloc irq_desc for 157 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 157 for MSI/MSI-X
alloc irq_desc for 158 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 158 for MSI/MSI-X
alloc irq_desc for 159 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 159 for MSI/MSI-X
alloc irq_desc for 160 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 160 for MSI/MSI-X
alloc irq_desc for 161 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 161 for MSI/MSI-X
alloc irq_desc for 162 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 162 for MSI/MSI-X
alloc irq_desc for 163 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
bnx2x 0000:01:00.3: irq 163 for MSI/MSI-X
Refined TSC clocksource calibration: 2599.999 MHz.
Switching to clocksource tsc
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: TSSTcorp DVD+/-RW SN-208BB, D150, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM TSSTcorp DVD+-RW SN-208BB D150 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
usb 2-1: new high speed USB device number 2 using ehci_hcd
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
sd 0:2:2:0: Attached scsi generic sg2 type 0
sr 5:0:0:0: Attached scsi generic sg3 type 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new high speed USB device number 3 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610
usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4: Product: USB2.0 Hub
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
EXT3-fs: barriers disabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
usb 1-1.6: new high speed USB device number 4 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=0624, idProduct=0248
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
usb 1-1.6: configuration #1 chosen from 1 choice
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
usb 2-1.2: new high speed USB device number 3 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=1a40, idProduct=0101
usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.2: Product: USB 2.0 Hub [MTT]
usb 2-1.2: configuration #1 chosen from 1 choice
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
usb 1-1.4.1: new high speed USB device number 5 using ehci_hcd
usb 1-1.4.1: New USB device found, idVendor=05e3, idProduct=0610
usb 1-1.4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4.1: Product: USB2.0 Hub
usb 1-1.4.1: configuration #1 chosen from 1 choice
hub 1-1.4.1:1.0: USB hub found
hub 1-1.4.1:1.0: 4 ports detected
usb 1-1.6.1: new high speed USB device number 6 using ehci_hcd
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20120917
usb 1-1.6.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input2
generic-usb 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input3
generic-usb 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/input/input4
generic-usb 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
usb 2-1.2.4: new full speed USB device number 4 using ehci_hcd
udevd[982]: starting version 175
usb 2-1.2.4: New USB device found, idVendor=067b, idProduct=2305
usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.4: Product: IEEE-1284 Controller
usb 2-1.2.4: Manufacturer: Prolific Technology Inc.
usb 2-1.2.4: configuration #1 chosen from 1 choice
iTCO_vendor_support: vendor-support=0
ACPI Error: No handler for Region [SYSI] (ffff881873d64420) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff881873d618d0), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff881873d61920), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-759)
ACPI: WMI: Mapper loaded
usb 1-1.4.1.3: new full speed USB device number 7 using ehci_hcd
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC: Ver: 2.1.0 Oct 1 2013
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:7f:0e.0
EDAC sbridge: Driver loaded.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
usb 1-1.4.1.3: New USB device found, idVendor=0403, idProduct=6001
usb 1-1.4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4.1.3: Product: USB Serial Converter
usb 1-1.4.1.3: Manufacturer: FTDI
usb 1-1.4.1.3: SerialNumber: FTGNLX43
usb 1-1.4.1.3: configuration #1 chosen from 1 choice
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input5
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
EXT3-fs (dm-0): using internal journal
lp: driver loaded but no devices found
ipmi device interface
Adding 7340024k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:7340024k
EXT3-fs: barriers disabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
EXT3-fs: barriers disabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
NET: Registered protocol family 10
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
bonding: bond0: setting xmit hash policy to layer3+4 (1).
bonding: bond0: setting mode to 802.3ad (4).
bonding: bond0: Adding slave eth0.
bnx2x 0000:01:00.0: eth0: using MSI-X IRQs: sp 124 fp[0] 126 ... fp[7] 133
bonding: bond0: enslaving eth0 as a backup interface with an up link.
bonding: bond0: Adding slave eth1.
bnx2x 0000:01:00.1: eth1: using MSI-X IRQs: sp 134 fp[0] 136 ... fp[7] 143
bonding: bond0: enslaving eth1 as a backup interface with an up link.
bonding: bond0: Adding slave eth2.
bnx2x 0000:01:00.2: eth2: using MSI-X IRQs: sp 144 fp[0] 146 ... fp[7] 153
bnx2x 0000:01:00.2: eth2: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
bonding: bond0: enslaving eth2 as a backup interface with an up link.
bonding: bond0: Adding slave eth3.
bnx2x 0000:01:00.3: eth3: using MSI-X IRQs: sp 154 fp[0] 156 ... fp[7] 163
bnx2x 0000:01:00.3: eth3: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
bonding: bond0: enslaving eth3 as a backup interface with an up link.
device bond0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth2 entered promiscuous mode
device eth3 entered promiscuous mode
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
vmbr0: port 1(bond0) entering forwarding state
bnx2x 0000:01:00.0: eth0: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
bnx2x 0000:01:00.0: eth0: using MSI-X IRQs: sp 124 fp[0] 126 ... fp[7] 133
bnx2x 0000:01:00.0: eth0: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
bnx2x 0000:01:00.1: eth1: using MSI-X IRQs: sp 134 fp[0] 136 ... fp[7] 143
bnx2x 0000:01:00.2: eth2: using MSI-X IRQs: sp 144 fp[0] 146 ... fp[7] 153
bnx2x 0000:01:00.2: eth2: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
bnx2x 0000:01:00.3: eth3: using MSI-X IRQs: sp 154 fp[0] 156 ... fp[7] 163
bnx2x 0000:01:00.3: eth3: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
fuse init (API version 7.13)
bnx2x 0000:01:00.1: eth1: NIC Link is Up, 1000 Mbps full duplex, Flow control: none
DLM (built Oct 1 2013 09:05:31) installed
vmbr0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ip6_tables: (C) 2000-2006 Netfilter Core Team
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Enabling conntracks and NAT for ve0
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
mpt2sas version 13.101.00.00 loaded
ploop_dev: module loaded
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
device tap500i0 entered promiscuous mode
vmbr0: port 2(tap500i0) entering forwarding state
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
venet0: no IPv6 routers present
EXT4-fs (dm-1): Unaligned AIO/DIO on inode 86245387 by kvm; performance will be poor.
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
megasas: fasync_helper was not called first
tap500i0: no IPv6 routers present
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 8 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
netlink: 4 bytes leftover after parsing attributes.
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
usb 1-1.4.1.3: reset full speed USB device number 7 using ehci_hcd
ftdi_sio 1-1.4.1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.4.1.3: Detected FT232RL
usb 1-1.4.1.3: Number of endpoints 2
usb 1-1.4.1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.4.1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.4.1.3: Setting MaxPacketSize 64
usb 1-1.4.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
usb 1-1.4.1.3: usbfs: interface 0 claimed by ftdi_sio while 'kvm' sets config #1
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.4.1.3:1.0: device disconnected
device tap1000i0 entered promiscuous mode
vmbr0: port 3(tap1000i0) entering forwarding state
device tap1001i0 entered promiscuous mode
vmbr0: port 4(tap1001i0) entering forwarding state
device tap1002i0 entered promiscuous mode
vmbr0: port 5(tap1002i0) entering forwarding state
tap1000i0: no IPv6 routers present
device tap1003i0 entered promiscuous mode
vmbr0: port 6(tap1003i0) entering forwarding state
tap1001i0: no IPv6 routers present
device tap1004i0 entered promiscuous mode
vmbr0: port 7(tap1004i0) entering forwarding state
tap1002i0: no IPv6 routers present
device tap1005i0 entered promiscuous mode
vmbr0: port 8(tap1005i0) entering forwarding state
tap1003i0: no IPv6 routers present
device tap1006i0 entered promiscuous mode
vmbr0: port 9(tap1006i0) entering forwarding state
tap1004i0: no IPv6 routers present
device tap1009i0 entered promiscuous mode
vmbr0: port 10(tap1009i0) entering forwarding state
tap1005i0: no IPv6 routers present
device tap5000i0 entered promiscuous mode
vmbr0: port 11(tap5000i0) entering forwarding state
tap1006i0: no IPv6 routers present
tap1009i0: no IPv6 routers present
tap5000i0: no IPv6 routers present